Base Layer- CH7X, iron in at 140C, let cool, scrape and brush with Steel or Bronze Brush, polish with White Nylon Brush.
LF Layer- LF7X, repeat steps above.
HF Layer- HF7BWX, repeat steps above.
Cera F Layer- FC8XS Warm Turbo Block, rub on and rotofleece in, brush out with Horsehair or Wild Boar Brush, polish with Blue Nylon Brush.
Roughen kick zone with 120grip sand paper.
Binder Layer- VG35 Green Base Binder, apply one layer and iron in at 115c, smooth with a cork and let cool 5-10 minutes outside.
Kicking Layer- VR55N, 3-5 layers, cork each layer smooth.