HF Layer- HF6X Blue
Iron in at 145C, let cool and scrape. Brush out with Steel or Bronze brush, finish with Nylon brush.
Cera F Layer- FC6X Cera F Powder
Iron in at 165C, let cool. Brush out with Wild Boar/Horsehair brush, finish with Blue Nylon brush.
Velocity Enhancement Layer- FC6XS Cold Turbo Solid
Roto-Fleece in and brush out with Wild Boar/Horsehair brush, finish with Blue Nylon brush.
Note- If you are not using Cera F Powders, only Turbo Solids and HVC Liquids, FC6XS Cold Turbo Block is an ideal substitute for FC6X Cera F Powder.
Roughen kick zone with 120grit sandpaper.
Binder Layer- Apply 1 layer of VG35 Green base binder, iron in, smooth and let cool.
Kicking Layer- Apply 3-5 layers of VR40 Blue. Cork each layer smooth.
Speed Layer (if needed)- Apply 1-2 layers of VX43. Cork each layer smooth.