Base Layer - CH7X. Apply and iron in at 140C. Let cool, scrape and brush out using a Steel or Bronze Brush.
LF Layer - LF7X. Repeat steps above.
HF Layer - HF7X. Repeat steps above.
Cera F Layer - FC7X Cera F Powder. Apply and iron in at 160C. Let cool, one light scrape then brush out first using a Wild Boar or Horsehair brush and polish with a Blue Nylon brush. Note- FC6XS Cold Turbo Block can be used as a substitute to Cera F Powder. Apply and rotofleece in then brush out first using a Wild Boar or Horsehair brush, then polish with a Blue Nylon brush.
Top Coat Layer - HVC Cold Liquid. Apply 30 minutes before race start and let dry. Final step, make sure to keep up with your skis!
Binder Layer - VG35 Green Base Binder. Apply one layer and iron in at 120C. Smooth with a cork and let cool outside for 10 minutes.
Kicking Layer - VR45, 3-5 layers, cork each layer smooth.
Note- if extra kick is needed, try 1-2 layers of VR55N under the foot. Also try VX43 if the VR45 is bomber kick but you need a little more speed, 1 layer of VX43 covered over the VR45 will be very fast.