Base layer - CH4x
Glide layer - LF4x
Fluor layer - no Cera F fluor is advised in these bitter cold conditions.
Additive - LF3x Cold Powder may be added as an additional hardener
Notes: iron in CH4 with your iron set at 150 Celsius. When the CH4 is liquid, you may sprinkle in LF3 and then blend the two waxes together.
It may take 6 or more passed of the iron to melt CH4. It's hard! Which is good.
After the ski has fully cooled, scrape, then make 3-4 passes with the fine steel brush. Follow up with the medium bronze brush and the nylon brush. Finish with a horse hair brush and the blue polishing brush.
After skiing during warmup, rebrush with the horse hair and blue polishing brush.
A dedicated cold grind ski with numerous layers of cold wax is advised.