Base Layer- CH8X, iron in at 125C, let cool, scrape and brush out with Steel or Bronze Brush, polish with White Nylon Brush.
LF Layer- LF8X, repeat steps above.
HF Layer - HF8BWX, repeat steps above.
Cera F Layer - FC8XSW, Warm Turbo Block, rub on and rotofleece in, brush out with Horsehair or Wild Boar Brush, polish with Blue Nylon Brush.
HVC Layer- HVC Warm, apply and let dry.
Roughen kick zone with 120grit sandpaper.
Binder Layer - KB20 Green Spray Klister, apply and smooth with thumb, let cool 5-10 minutes
Klister Layer - Try either K22 Swix Uni Klister or KN44 Nero Klister